Cookie Img
Send SMS
+917259409599
Home » Products » Chequered Tile » Chequered Floor Tiles

Chequered Floor Tiles

Chequered Floor Tiles
Chequered Floor Tiles
Send Inquiry
Product Code : SE-02
Brand Name : Sushma Enterprises
Price And Quantity
  • Minimum Order Quantity
  • as per requirment
  • Unit of Measure
  • Piece/Pieces
Product Description

In the last few years we have established ourselves as one of the most prominent organizations engaged in offering Chequered Floor Tiles. These tiles are used for landscaping and paving purposes in gardens and commercial premises. The tiles give the space an eye catchy looks and can withstand high impact. We make available these Chequered Floor Tiles for clients in different sizes and colors as per their requirements. Moreover, we offer these tiles at cost effective prices.

Features:

  • Light weight
  • Sturdy in nature
  • Smooth finishing

Further Details:

Chequered tiles are cement tiles or terrazzo tiles with the center to center distance of chequeres not less than 25 mm and not more than 50 mm, the grooves in the chequeres being uniform and straight with a depth of grooves not less than 3 mm. These tiles are available in different arrangements of chequeres and in attractive colours.

Specification of Material :

  • Cement : Cement used in the manufacture of Chequered Tiles is ordinary Portland cement conforming to IS: 81121976 (43 Grade OPC) or IS: 12269-1987 (43 Grade OPC)
  • Aggregate : In backing layer of chequered tiles, aggregate confirming to IS: 383-1970 is used. For the wearing layer, aggregate consists of marble chips or any other natural stones chips of similar characteristics and hardness; marble powder or dolomite powder or the mixture of the two is used.
  • Pigments : Colouring pigments provide attractive colours to the chequered tiles. Only permitted and durable colours are used in manufacture of chequered tiles. The colouring pigment used in wearing layer is restricted to 10% by mass of cement used.
  • Manufacture : Chequered cement concrete tiles are manufactured from a mixture of cement, natural aggregate and colouring material by hydraulic pressure process. During manufacture, the tiles are subjected to a pressure not less than 14 N/ mm2. The proportion of cement to aggregate in the backing layer is maintained to 1:3 by pass.

Dimensions :

The size of chequered tiles as specified in IS 13801-1993 is as under :

Length

Width

Thickness

200 mm

200 mm

22 mm

250 mm

250 mm

22 mm

300 mm

300 mm

25 mm

Tolerances

  • The tile are manufactured within the following tolerance limits:
  • Length & Breadth = (+ 1 mm)
  • Thickness = (+ 5mm, - 0)

Thickness of wearing layer

The thickness of wearing layer of chequered is maintained minimum 6 mm.

Finish :

The strict quality control measures are taken during the manufacture to maintain the uniform colour and texture of wearing layer throughout its thickness.

Physical Requirements :

The test on tiles are carried our after 28 days if manufacture. The samples of tiles are subjected to following tests;

  • Flatness If Tile Surface is checked by metal ruler to ensure concavity and convexity less than 1 mm.
  • Perpendicularity is checked by square and it is ensured that edge of the tiles shall not exceed 2% of the length of the edge.
  • Straightness is performed with a thread and the plane of tile is ensured not to exceed 1% of the length of the edge.
  • Water Absorption the tiles is tested for absorption of water. It should be less than 10% after 24 hours absorption.
  • Wet transverse Strength is the most important test and each performed on wet transverse strength testing machine. The proper mix ratio and maximum compression is applied during manufacture to get the wet transverse strength more than 3N / mm2.
  • Resistance of Water The test specimen square in shape and size 70.6 mm X 70.6 mm ( 500 22m in area) is tested in abrasion testing machine to determine resistance of wear. Proper care is taken during mixing and manufacture to ensure the following values:
    • Average Wear = 2 mm
    • Wear on individual specimen = 2.5 mm
  • After taking proper quality measures and performing all tests (as specified in IS : 13801-1993) on tiles specimen, tiles are dispatched to the customer.

Mosiac Tiles :

The cement concrete flooring tiles are widely used in floors of official buildings, school, college, residential, buildings, footpath, staircases etc. These tiles are generally classified in two classes depending on the duty they perform.

General purpose tiles

For normally light loads.

Heavy duty floor tiles

For heavy traffic conditions

The cement concrete flooring tiles are available is following types.

Plain cement tiles

Manufacture without using pigments and stone chips in waring surface.

Plain coloured tiles

Manufacture using colouring pigments but no stone chips in wearing surface.

Terrazatiles

Tiles at least 25% of whose wearing surface is composed of stone chips in a matrix of ordinary or coloured Portland cement mixed with or without pigments.

Specification of material :

  • Cement : Cement used in the manufacture of chequered tiles is ordinary Portland cement conforming to IS: 81121976 (43 Grade OPC) or IS : 12269-1987 (43 Grade OPC)
  • Aggregate : In backing layer of tiles, aggregate conforming to the requirements of IS : 383-1970 is used. In wearing layer marble chips or any other natural stone chips, marble power or dolomite powder or mixture of the two is used.
  • Pigments : Only permitted and durable colours are used.
  • Manufacture : Cement concrete flooring tiles are manufactured from a mixture of cement, natural aggregate and colouring pigments by hydraulic pressure process, having proportion of cement to aggregate 1:3 by mass in backing layer. The colouring material used in wearing layer is restricted to 10% by mass of cement used. During manufacture, the tiles are subjected to a pressure not less than 14 N.mm2 140 Kg / Cm2)

Dimension :

The size of flooring tiles, as specified in IS: 1237-1980, are as under:-

Length

Width

Thickness

200 mm

200 mm

22 mm

250 mm

250 mm

22 mm

300 mm

300 mm

25 mm

Tolerances

  • Length= (+ 1 mm)
  • Breadth = (+ 1 mm)
  • Thickness = (+ 5mm, - 0)

Thickness of Waring Layer :

S.No.

Class of Tiles

Minimum Thickness of Wearing Layer

1

Plain tiles for general Purpose.

5 mm

2

Tiles with chip size from smallest to 6mm, general purpose

5 mm

3

Tiles with chip size from smallest to 12mm, general purpose

5 mm

4

Tiles with chip size from smallest to 20mm, general purpose

6 mm

5

Plain tiles for heavy duty.

6 mm

6

Tiles with chip size from smallest to 20mm, heavy duty.

6 mm

Trade Information
  • Payment Terms
  • Cash on Delivery (COD), Cash Advance (CA), Cheque, Telegraphic Transfer (T/T)
  • Sample Available
  • Yes
  • Sample Policy
  • Contact us for information regarding our sample policy
  • Packaging Details
  • standard
  • Main Domestic Market
  • Rajasthan
  • Certifications
  • ISO 9001-2008,ISI12592

Sushma Enterprises
X


Back to top